348
C
HAPTER
39: I
NFORMATION
C
ENTER
Perform the following configuration in user view.
Enabling Information
Output to the Log Buffer
Table 304 lists the related configurations on the switch.
To view debug information of specific modules, you need to set the information type
as debug
in the
info-center source
command, and enable debugging on
corresponding modules with the
debugging
command as well.
Enabling Information
Output to the Trap
Buffer
Table 305 lists the related configurations on the switch.
Table 303
Enable debug/log/trap terminal display
Operation
Command
Description
Enable the
debug/log/trap
terminal display
function
terminal monitor
Optional
By default, this function is enabled for
console user.
Enable debugging
terminal display
terminal debugging
Optional
By default, debugging terminal display is
disabled for terminal users.
Enable logging
terminal display
terminal logging
Optional
By default, logging terminal display is
enabled for console users.
Enable trapping
terminal display
terminal trapping
Optional
By default, trapping terminal display is
enabled for terminal users.
Table 304
Enable information output to the log buffer
Operation
Command
Description
Enter system view
system-view
—
Enable the information
center
info-center enable
Optional
By default, the information center is
enabled.
Enable information
output to the log
buffer
info-center logbuffer
[
channel
{
channel
-
number |
channel
-
name
} |
size
buffersize ]
Optional
By default, the switch outputs
information to the log buffer, which
can holds up to 512 items by
default.
Define an information
source
info
-
center source
{
modu
-
name
|
default }
channel
{
channel
-
number |
channel
-
name }
[
{
log
|
trap
|
debug
} * {
level
severity
|
state
state }
* ]
Required
Set the format of time
stamp
info-center timestamp
{
log
|
trap
|
debugging }
{
boot
|
date
|
none
}
Optional
This is to set the time stamp format
for log/debug/trap information
output.
This determines how the time
stamp is presented to users.
Table 305
Enable information output to the trap buffer
Operation
Command
Description
Enter system view
system-view
—
Enable the information
center
info-center enable
Optional
By default, the information center is
enabled.
Summary of Contents for 4200G 12-Port
