Information Center Configuration
349
To view debug information of specific modules, you need to set the information type
as debug in the
info-center source
command, and enable debugging on
corresponding modules with the
debugging
command as well.
Enabling Information
Output to the SNMP
Table 306 lists the related configurations on the switch.
To view debug information of specific modules, you need to set the information type
as
debug
in the
info-center source
command, and enable debugging on
corresponding modules with the
debugging
command as well.
To send information to remote SNMP workstation properly, related configurations are
required on both the switch and the SNMP workstation.
Enable information
output to the trap
buffer
info-center trapbuffer
[
channel
{
channel
-
number |
channel
-
name
}
]
[
size
buffersize
]
Optional
By default, the switch outputs
information to the trap buffer,
which can holds up to 256 items by
default.
Define an information
source
info
-
center source
{
modu
-
name
|
default }
channel
{
channel
-
number |
channel
-
name }
[
{
log
|
trap
|
debug
} * {
level
severity
|
state
state }
* ]
Required
Set the format of time
stamp
info-center timestamp
{
log |
trap
|
debugging }
{
boot
|
date
|
none
}
Optional
This is to set the time stamp format
for log/debug/trap information
output.
This determines how the time
stamp is presented to users.
Table 305
Enable information output to the trap buffer
Operation
Command
Description
Table 306
Enable information output to the SNMP
Operation
Command
Description
Enter system view
system-view
—
Enable the information
center
info-center enable
Optional
By default, the information center is
enabled.
Enable information
output to the SNMP
info-center snmp channel
{
channel
-
number |
channel
-
name }
Required
By default, SNMP information goes
through channel 5.
Define an information
source
info
-
center source
{
modu
-
name
|
default }
channel
{
channel
-
number |
channel
-
name }
[
{
log
|
trap
|
debug
} * {
level
severity
|
state
state }
* ]
Required
Set the format of time
stamp
info-center timestamp
{
log
|
trap
|
debugging }
{
boot
|
date
|
none
}
Optional
This is to set the time stamp format
for log/debug/trap information
output.
This determines how the time
stamp is presented to users.
Summary of Contents for 4200G 12-Port
