1-25
View
System view
Parameters
None
Description
Use the
sftp server enable
command to enable the SFTP server.
Use the
undo sftp server
command to disable the SFTP server.
By default, the SFTP server is disabled.
Examples
# Enable the SFTP server.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] sftp server enable
%Start SFTP server
sftp timeout
Syntax
sftp timeout time-out-value
undo sftp timeout
View
System view
Parameters
time-out-value
: Timeout time, in the range 1 to 35,791, in minutes. The default value is 10.
Description
Use the
sftp timeout
command to set the idle timeout time on an SFTP server.
Use the
undo sftp timeout
command to restore the idle timeout time to the default value.
If the idle timeout time exceeds the specified threshold, the system disconnects the SFTP user
automatically.
Examples
# Set the idle timeout time to 500 minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] sftp timeout 500
Summary of Contents for 5500-EI PWR
