1-1
1
Port Isolation Configuration Commands
Port Isolation Configuration Commands
display isolate port
Syntax
display isolate port
View
Any view
Parameters
None
Description
Use the
display isolate port
command to display the Ethernet ports assigned to the isolation group.
Examples
# Display the Ethernet ports added to the isolation group.
<Sysname> display isolate port
Isolated port(s) on UNIT 1:
Ethernet1/0/2, Ethernet1/0/3, Ethernet1/0/4
The information above shows that Ethernet1/0/2, Ethernet1/0/3, and Ethernet1/04 are in the isolation
group. Neither Layer-2 nor Layer-3 packets can be exchanged between these ports.
port isolate
Syntax
port isolate
undo port isolate
View
Ethernet port view
Parameters
None
Description
Use the
port isolate
command to assign the Ethernet port to the isolation group.
Use the
undo port isolate
command to remove the Ethernet port from the isolation group.
Summary of Contents for 5500-EI PWR
