6-5
memory auto-establish enable
Syntax
memory auto-establish enable
View
System view
Parameters
None
Description
Use the
memory auto-establish enable
command to enable automatic connections of routing
protocols when the free memory of the switch recovers to the specified value.
Use the
memory auto-establish disable
command to disable this function.
By default, when the free memory of the switch recovers to a safety value, connections of all the routing
protocols will always recover (when the free memory of the switch decreases to a lower limit, the
connection will be disconnected forcibly).
By default, this function is enabled.
Related commands:
memory auto-establish disable
,
memory
,
display memory limit
.
Examples
# Enable automatic connections of all routing protocols when the free memory of the current switch
recovers.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] memory auto-establish enable
Summary of Contents for 5500-EI PWR
