3Com 5500-EI PWR Reference Manual Download

Page: 723 / 1314

3-4

Use the

undo

dhcp-snooping information remote-id

command to restore the default value of the

remote ID sub-option in Option 82.

By default, the remote ID sub-option in Option 82 is the MAC address of the DHCP Snooping device

that received the DHCP client’s request.

Examples

# Configure the remote ID sub-option of Option 82 as the system name (sysname) of the DHCP

snooping device.

<Sysname> system-view

System View: return to User View with Ctrl+Z.

[Sysname] dhcp-snooping information remote-id sysname

dhcp-snooping information strategy

Syntax

dhcp-snooping information strategy

{

drop

keep

replace

}

undo dhcp-snooping information strategy

View

System view, Ethernet port view

Parameters

drop

: If a packet contains Option 82, DHCP snooping drops this packet.

keep

: If a packet contains Option 82, DHCP snooping keeps and forwards this packet.

replace

: If a packet contains Option 82, DHCP snooping replaces the original Option 82 field with the

Option 82 field having the specified padding content and forwards the packet.

Description

Use the

dhcp-snooping information strategy

command in system view to configure a handling policy

for DHCP requests that contain Option 82 sent by the DHCP client.

Use the

undo dhcp-snooping information strategy

command to restore the default handling policy.

Use the

dhcp-snooping information strategy

command in Ethernet port view to configure a handling

policy for requests that contain Option 82 received on the current port.

Use the

undo dhcp-snooping information strategy

command to restore the default handling policy.

By default, after DHCP-snooping Option 82 support is enabled, DHCP snooping replaces the Option 82

field in the requests sent by the DHCP clients.

Summary of Contents for 5500-EI PWR



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5500-EI PWR

Reviews:

Related manuals for 5500-EI PWR

Brands by name

Popular brands

3Com 5500-EI PWR, Reference Manual

Search results

Summary of Contents for 5500-EI PWR

Reviews:

Related manuals for 5500-EI PWR

Brands by name

Popular brands