3Com 5500-EI PWR Reference Manual Download

Page: 766 / 1314

1-27

jointly define a period in which the absolute time range takes effect. If the start date is not specified, the

time range starts from 1970/01/01 00:00.

end-time end-date

: Specifies the end date of an absolute time range, in the form of hh:mm

MM/DD/YYYY or hh:mm YYYY/MM/DD. The

start-time start-date

and

end-time end-date

argument

jointly define a period in which the absolute time range takes effect. If the end date is not specified, the

time range ends at 2100/12/31 23:59.

Description

Use the

time-range

command to define a time range.

Use the

undo time-range

command to remove the specified or all time ranges.

Note that:

The switch supports up to 256 time ranges, each of which can have up to 32 periodic time ranges

and 12 absolute time ranges.

If only a periodic time section is defined in a time range, the time range is active only when the

system time is within the defined periodic time section. If multiple periodic time sections are

defined in a time range, the time range is active only when the system time is within one of the

periodic time sections.

If only an absolute time section is defined in a time range, the time range is active only when the

system time is within the defined absolute time section. If multiple absolute time sections are

defined in a time range, the time range is active only when the system time is within one of the

absolute time sections.

If both a periodic time section and an absolute time section are defined in a time range, the time

range is active only when the periodic time range and the absolute time range are both matched.

Assume that a time range defines an absolute time section from 00:00 January 1, 2004 to 23:59

December 31, 2004, and a periodic time section from 12:00 to 14:00 every Wednesday. This time

range is active only when the system time is within 12:00 to 14:00 every Wednesday in 2004.

Examples

# Define a periodic time range that is active from 08:00 to 12:00 every working day.

<Sysname> system-view

System View: return to User View with Ctrl+Z.

[Sysname] time-range tr1 08:00 to 12:00 working-day

# Define an absolute time range that is active from 12:00 January 1, 2008 to 12:00 June 1, 2008.

[Sysname] time-range tr2 from 12:00 1/1/2008 to 12:00 6/1/2008

# Display the configuration information of the time ranges.

[Sysname] display time-range all

Current time is 17:37:23 Nov/27/2007 Tuesday

Time-range : tr1 ( Inactive )

08:00 to 12:00 working-day

Time-range : tr2 ( Inactive )

Summary of Contents for 5500-EI PWR



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5500-EI PWR

Reviews:

Related manuals for 5500-EI PWR

Brands by name

Popular brands

3Com 5500-EI PWR, Reference Manual

Search results

Summary of Contents for 5500-EI PWR

Reviews:

Related manuals for 5500-EI PWR

Brands by name

Popular brands