1-2
Examples
# Enable the burst function.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] burst-mode enable
display protocol-priority
Syntax
display protocol-priority
View
Any view
Parameters
None
Description
Use the
display protocol-priority
command to display the list of protocol priorities you
assigned with the
protocol-priority
command.
A Switch 5500-EI supports setting priorities for certain protocol packets generated by it.
The supported protocols are Telnet, SNMP, ICMP, and OSPF. Depending on your
configuration, the IP or DSCP precedence is displayed for a specified protocol.
Related commands:
protocol-priority
.
Examples
# Display the list of protocol priorities manually specified.
<Sysname> display protocol-priority
Protocol: ospf
IP-Precedence: routine(0)
Protocol: telnet
DSCP: be(0)
Table 1-1
Description on the fields of the
display protocol-priority
command
Field
Description
Protocol: ospf
Indicate that a priority has been set for
OSPF packets with the
protocol-priority
command.
Summary of Contents for 5500-EI PWR
