1-11
View
Any view
Parameters
interface-type interface-number
: Specifies the type and number of a port for which traffic
accounting configuration is to be displayed.
unit-id
: Unit ID of the switch for which traffic accounting configuration and traffic statistics
are to be displayed. For the value range for the
unit-id
argument, refer to
Table 1-2
.
Description
Use the
display qos-interface traffic-statistic
command to display the traffic accounting
configuration and traffic statistics of a port or a unit.
Related commands:
traffic-statistic
.
Examples
# Display the traffic accounting configuration and traffic statistics of Ethernet 1/0/1.
<Sysname> display qos-interface Ethernet1/0/1 traffic-statistic
Ethernet1/0/1: traffic-statistic
Inbound:
Matches: Acl 2000 rule 2 running
6 packets inprofile
0 packet outprofile
Refer to
Table 1-3
for the description on the output fields.
display queue-scheduler
Syntax
display queue-scheduler
View
Any view
Parameters
None
Description
Use the
display queue-scheduler
command to display the global queue scheduling
configuration.
This command does not display the weight or bandwidth set for a queue in port view. To
display the setting, you can perform the
display this
command in port view.
Related commands:
queue-scheduler
.
Summary of Contents for 5500-EI PWR
