1-24
snmp-agent trap life
Syntax
snmp-agent trap life seconds
undo snmp-agent trap life
View
System view
Parameters
seconds
: SNMP trap aging time (in seconds) to be set, ranging from 1 to 2,592,000.
Description
Use the
snmp-agent trap life
command to set the SNMP trap aging time. SNMP traps exceeding the
aging time will be discarded.
Use the
undo snmp-agent trap life
command to restore the default SNMP trap aging time.
By default, the SNMP trap aging time is 120 seconds.
The system discards the traps that timed out and not sent in the SNMP trap queue.
Related commands:
snmp-agent trap enable
,
snmp-agent target-host
.
Examples
# Set the SNMP trap aging time to 60 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] snmp-agent trap life 60
snmp-agent trap queue-size
Syntax
snmp-agent trap queue-size
size
undo snmp-agent trap
queue-size
View
System view
Parameters
size
: The maximum number of traps that can be stored in the queue, an integer ranging from 1 to 1,000.
Description
Use the
snmp-agent trap queue-size
command to set the length of the queue of the SNMP traps to be
sent to the destination.
Use the
undo snmp-agent trap queue-size
command to restore the default queue length.
By default, an SNMP trap queue can contain up to 100 SNMP traps.
Summary of Contents for 5500-EI PWR
