Adding ELANs
3-21
Adding ELANs
Additional ELANs can be added to a NIC after the initial
installation. Perform the following procedure to add
additional ELANs:
1
If multiple ATMLink NICs are installed, identify the PCI slot
and bus number of the NICs on which you want to install
additional ELANs.
Use the diagnostic utility to obtain this information if you do
not already have it.
2
Perform steps 1 through 9 of the Windows NT driver
installation procedur
e
, as described in the section
“Installing the Network Driver.”
3
In the Select OEM Option window, select
3Com ATMLink
PCI NIC
ELAN Instance
, as shown in Figure 3-12
.
Figure 3-12
Select OEM Option Window
