82
C
HAPTER
6: C
ONFIGURING
THE
C
ORE
B
UILDER
7000 F
AMILY
ATM S
WITCH
Running a Batch File
To run a batch file (.bat) on your CoreBuilder 7000 family ATM switch, do
the following:
1
Perform the menu item:
(1) SYS \(3) LOA \(3) LCL \ 1
2
Reboot the CoreBuilder 7000 family ATM switch.
3
Connect your PC to the Service Port of the CoreBuilder 7000 family ATM
switch.
4
In the PC, change the directory to the one containing the appropriate
files.
5
Run the appropriate batch file from Table 18:
a
Type the name of the batch file
b
Type the appropriate ComPort switch (com1/com2)
c
Type the appropriate Speed switch (19200/57600/115200)
d
Press Enter
e
Choose desired option at a prompt(s) (if at all)
Returning to
Operational Mode
After the software has been stored or retrieved, the system will still be in
load mode. To return the system to normal operational mode, use one of
the following methods.
Download a configuration parameter group from the
PC to the switch engine flash memory
grp_down.bat
Erase a configuration parameter group in the switch
engine flash memory
grperase.bat
Set debug flag to ON
dbgon.bat
Set debug flag to OFF
dbgoff.bat
Download all software executable files to the flash
memory
down_all.bat
Download all SW executables except atmsw.fls
downpart.bat
Download only atmsw.fls
downmain.bat
Download all software executable files to the flash
memory and erase the configuration in flash memory
downoper.bat
Table 18
Utilities for Upload/Download (continued)
Utility
Batch file name
Summary of Contents for CoreBuilder 7000
