background image

3Com Corporation L

IMITED

 W

ARRANTY

The duration of the warranty for the CoreBuilder 7000/7000HD Chassis and Switch Engine is: Enhanced One-year Limited -— return to 
factory for free repair. One year warranty with 90 days of Advance Hardware Replacement service, subject to availability.

The duration of the warranty for all other CoreBuilder 7000 Hardware Modules is: One Year limited — return to factory for free repair. 
Advance Hardware Replacement service is available for an additional fee, subject to availability. 

H

ARDWARE

3Com warrants its hardware products to be free from defects in workmanship and materials, under normal 
use and service, for the following lengths of time from the date of purchase from 3Com or its authorized 
reseller:

If a product does not operate as warranted above during the applicable warranty period, 3Com shall, at its 
option and expense, repair the defective product or part, deliver to Customer an equivalent product or part 
to replace the defective item, or refund to Customer the purchase price paid for the defective product. 
All products that are replaced will become the property of 3Com. Replacement products may be new or 
reconditioned. Any replaced or repaired product or part has a ninety (90) day warranty or the remainder of 
the initial warranty period, whichever is longer.

S

OFTWARE

3Com warrants that the software programs licensed from it will perform in substantial conformance to the 
program specifications therefor for a period of ninety (90) days from the date of purchase from 3Com or its 
authorized reseller. 3Com warrants the media containing software against failure during the warranty period. 
No updates are provided. 3Com’s sole obligation with respect to this express warranty shall be (at 3Com’s 
discretion) to refund the purchase price paid by Customer for any defective software products, or to replace any 
defective media with software which substantially conforms to applicable 3Com published specifications. 
Customer assumes responsibility for the selection of the appropriate applications program and associated 
reference materials. 3Com makes no warranty or representation that its software products will meet 
Customer’s requirements or work in combination with any hardware or applications software products 
provided by third parties, that the operation of the software products will be uninterrupted or error free, or that 
all defects in the software products will be corrected. For any third party products listed in the 3Com software 
product documentation or specifications as being compatible, 3Com will make reasonable efforts to provide 
compatibility, except where the non-compatibility is caused by a “bug” or defect in the third party's product.

Y

EAR

 2000 W

ARRANTY

In addition to the Hardware Products Warranty and Software Products Warranty identified above, 3Com 
warrants that all Heritage 3Com products sold or licensed to Customer on and after January 1, 1998 that are 
date sensitive will continue performing properly with regard to such date data on and after January 1, 2000, 
provided that all other products used by Customer in connection or combination with the 3Com products, 
including hardware, software, and firmware, accurately exchange date data with the 3Com products, with the 
exception of those products identified at 3Com’s Web site, http://www.3com.com/products/yr2000.html, as 
not meeting this standard. A product is considered a “Heritage 3Com product” if it is a member of a product 
family which was manufactured by 3Com prior to its merger with US Robotics Corporation. This Year 2000 
limited warranty does not apply to Heritage US Robotics Corporation products. If it appears that any such 
product does not perform properly with regard to such date data on and after January 1, 2000, and Customer 
notifies 3Com before the later of April 1, 2000, or ninety (90) days after purchase of the product from 3Com 
or its authorized reseller, 3Com shall, at its option and expense, provide a software update which would effect 
the proper performance of such product, repair such product, deliver to Customer an equivalent product to 
replace such product, or if none of the foregoing is feasible, refund to Customer the purchase price paid for 
such product. 

Any software update or replaced or repaired product will carry a Year 2000 Warranty for ninety (90) days or 
until April 1, 2000, whichever is later. 

O

BTAINING

 W

ARRANTY

 

S

ERVICE

Customer must contact 3Com’s Corporate Service Center or an Authorized 3Com Service Center within the 
applicable warranty period to obtain warranty service authorization. Dated proof of purchase may be 
required. Products returned to 3Com’s Corporate Service Center must be pre-authorized by 3Com with a 
Return Material Authorization (RMA) number marked on the outside of the package, and sent prepaid and 
packaged appropriately for safe shipment, and it is recommended that they be insured. The repaired or 
replaced item will be shipped to Customer, at 3Com’s expense, not later than thirty (30) days after receipt of 
the defective product by 3Com.

Dead- or Defective-on-Arrival. 

In the event a product completely fails to function or exhibits a defect in 

materials or workmanship within the first forty-eight (48) hours of installation but no later than thirty (30) days 
after the date of purchase, and this is verified by 3Com, it will be considered dead- or defective-on-arrival 

Network Interface Cards

Lifetime

Other hardware products

*unless otherwise specified above

1 year*

Spare parts and spares kits

90 days

Summary of Contents for CoreBuilder 7000









































































































































































































































































Reviews: