182
C
HAPTER
7: C
ONFIGURING
V
IRTUAL
C
HANNELS
Port Static PVC Connection Parameters
Table 28 shows the PVC connection parameters displayed by the LMA.
Example
Enter:
3 4 1 1 p2p 0 0 0 5.2 1 55 1 5.4 0 60
The following message is displayed:
A new PVC was created with call id: 11
Table 28
Full UBR PVC Call Parameters
Name
Description
Call Type
Whether the call defined is point-to-point (P2P) or
point-to-multipoint (P2M).
No default.
Cell Loss Level Discard
The level of congestion at which the system starts
discarding cells. The possible levels can be: no discard,
20%, 50% and 80%. In a point-to-multipoint call the
value is constant at 80%.
Default: 50%.
Priority
Whether the call cells are transferred through the switch
to the high priority queue or low priority queue.
Default: Low priority.
First CLP
The discard policy for the cells of a call for the first (source)
point. The options are:
(0) Clear — Set all cells to be unmarked;
(1) Set — Set all cells to be marked for discarding;
(N) No change — leave all cells as they were when they
arrived at the port.
Default: (N) No change
First CLP
The setting of the cell loss priority at the input port
First Port ID
The input port <slot.port>
First VPI
The input port VPI value for the call
First VCI
The input port VCI value for the call
Second CLP (0,1,N)
The cell discard policy for the destination port
Default: (N) No change
Second Port ID
The output port <slot.port>
Second CLP
The setting of the cell loss priority at the output port
Second VPI
The output port VPI value for the call
Second VCI
The output port VCI value for the call
Summary of Contents for CoreBuilder 7000
