Troubleshooting
6-11
4. From the main menu, select Echo Server Setup.
The program notifies you that your computer is now
set up as an echo server.
Running the Group 3 Test
To run the Group 3 test on the 3C529 adapter:
1. Start the Configuration and Diagnostic Program.
This program must be on the computer containing
the adapter you want to test.
2. Select Test Setup from the Test menu.
3. Enable the Group 3 test. Highlight <OK> and
press [Enter].
4. Go to the Run dialog box to start the test.
5. After the test is completed:
a.
End the program on the echo server.
b. Exit the Configuration and Diagnostic Program.
Troubleshooting Tips
If the diagnostic tests fail, the adapter may not be
defective. The problem may be incorrect option settings,
option settings that conflict with the settings of other
boards, or improper installation. Follow these steps to
test the adapter further.
CAUTION: Make sure that you turn off the power before
inserting or removing the adapter from the computer.
