Other Procedures
31
Changing the Primary NIC
The first NIC added to an empty group is automatically
designated the
primary NIC
. NICs added subsequently are
designated as
secondary
NICs. Primary status is indicated
by a P icon at the beginning of the NIC name. When there
are more than one NIC in a group, you can change the
primary NIC as follows (see
Figure 8
):
1 Click the Load Balance/RSL tab.
2 In the Load Balance/RSL window, select a secondary
NIC from the Load Balance/RSL Groups list.
3 Click
Select Primary
.
The NIC you selected becomes the primary NIC.
Figure 8
Changing the Primary NIC
Book Page 31 Monday, June 7, 1999 2:14 PM
