100
C
HAPTER
5: I
NSTALLING
N
ET
W
ARE
C
LIENT
AND
S
ERVER
D
RIVERS
4 Enter this command:
3C99xC_TXM:\nwserver
The following message appears:
Product “3Com DynamicAccess Server Features”
was found. Verify that this is the product you
want to install before proceeding.
Press <ENTER> to continue.
Press <ESC> to abort installation.
5 Press Enter.
The system copies the Dynamic
Access
technology server
features software to the SYS volume.
Configuring Groups
1 Press Esc to return to the Installation Options screen.
2 From the Configuration Options screen, select
NCF files options (create/edit server startup files)
3 Select
Edit AUTOEXEC.NCF file
.
4 Make the following changes to the AUTOEXEC.NCF
file:
a
Add a command to load the SE and LBRSL drivers before
any commands to load LAN drivers. For example:
load se
load lbrsl
b
Add or verify the LOAD commands for the LAN drivers
for all slot-frame instances.
c
For each Load Balancing/RSL group, load the same
protocols and frame types on the primary and all
secondary NICs.
d
On the primary NIC only, bind a protocol to each
slot-frame instance.
CAUTION:
Do not set Novell’s Load Balance Local
LAN=ON when using SE and LIBRSL (the 3Com Load
Balancing suite).
