1-23
Figure 1-13
An XFP transceiver
z
No XFP transceivers are shipped with the F5000-A5.
z
Use only the XFP transceivers provided by H3C. The device cannot recognize other XFP
transceivers.
z
For how to connect XFP transceivers, refer to the section talking about connecting Ethernet cables
in Chapter 4 “Installing the Firewall.”
Power Supply Module
The F5000-A5 supports both AC and DC power input. You can select an AC power module or a DC
power module. However, never install the two types of power PSUs in the same device.
The F5000-A5 needs only one PSU for normal operation of the system. But the device provides two
slots for 1+1 redundancy.
The PSUs are hot-swappable.
Online insertion and removal of a PSU refers to first switching off the power module and then removing
it from the device or inserting it into the device.
AC power module
Table 1-26 lists the specifications for the AC power module of the device.
