6-14
Download successfully!
14092032 bytes downloaded!
The system then prompts you to enter the target file name.
Input the File Name:
Step5
Input the file name.
1) If the file name is different from that of any existing file in the storage medium, the application file is
saved using the specified file name, for example,
Input the File Name:main.bin
Updating File cfa0:/main.bin......... ..........................
........................................................................................
........................................................................................
.........................................Done!
After that, you need to return to the main menu, enter the file control submenu, and set this application
file as the default boot program. The system will use this program at next system reboot. For description
of the default boot program, refer to “Setting Application Files Attributes” on page 6-30.
2) If the file name already exists in the storage medium, the system displays:
The file is exist,will you recover it? [Y/N]
z
Enter
Y
to overwrite the existing application file and complete the upgrading operation. The system
uses the new application file at next system reboot.
z
Enter
N
and the system displays:
Cancel to overwrite the file.
Failed!
As a result, the existing application file is not overwritten and the upgrading operation fails.
The size of an application is often over 10 MB. Even if the baud rate is 115200 bps, it takes about 30
minutes to upgrade the application through a serial port. Therefore, you are recommended to upgrade
an application through Ethernet.
Upgrading BootWare
To upgrade the BootWare, follow these steps:
Step1
Enter the main BootWare menu (refer to “Main Menu” on page 6-5).
Step2
Select
7
to enter the BootWare operation submenu, where you can perform all BootWare operations.
For detailed description, refer to “BootWare Operation Submenu” on page 6-9.
The following example shows how to upgrade the entire BootWare.
You need to upgrade the basic segment and then the extended segment to upgrade the BootWare.
Step3
Select
3
on the BootWare operation submenu. The system displays:
=================<BOOTWARE OPERATION SERIAL SUB-MENU>================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
