3
B
ASIC
I
NSTALLATION
This chapter will guide you through a basic installation of
the HomeConnect Wireless Gateway, including
■
Connecting the Wireless Gateway to the Internet.
■
Connecting the Wireless Gateway to your network.
■
Setting up your computers for wireless and/or wired
(Ethernet) networking with the gateway.
Note that you can use your wireless gateway for either
wireless networking or Ethernet networking, or both. You
can also set up your home wireless gateway for home
networking only; connecting to the Internet is optional.
Connecting the Wireless Gateway to the Internet
The first step of installing your gateway is to physically
connect it to a cable or DSL modem in order to be able to
access the Internet.
External Cable and DSL Modem Connections
To use your gateway to connect an external cable or DSL
modem to the Internet (Figure 9):
1 Insert one end of an Ethernet (RJ-45 Category 5) cable
in the Cable/DSL port on the rear panel of the
gateway (see “Cable/DSL” on page 9).
2 Insert the other end to the RJ-45 port on your cable or
DSL modem
This port would normally be connected to an Ethernet port
on your modem. Refer to the documentation that came
with your modem for more details.
3 Connect the cable or DSL modem to the Internet.
This step might involve connecting to a phone jack or to a
cable box. See the documentation that came with your
modem for more details.
Summary of Contents for HomeConnect 3CRWE50194
