Chapter 3: Web Interface
Fig.47 Add Time Server dialog box
Time Zone (Relative to GMT)
Select the appropriate time zone. Click
Apply
to save changes.
System Time (yyyy/mm/dd hh:mm:ss)
This section is to manually set WebCAM
System Time
. The format is
pre-determined to: yyyy/mm/dd hh:mm:ss (in 24hr format). Click
Manual
Adjust
to save the changes.
ii. System
Restart
Fig.48 Auto Restart setting
Auto Restart System Every
…
The Administrator can choose to restart WebCAM at certain intervals (choose
between minutes and hours only). Click
Apply
to save any changes.
Manual Restart
Click
Restart Now
to restart the system immediately.
iii. LED
Settings
Fig.49 LED Settings
LED function
This function is not applicable.
iv. SNMP
Settings
WebCAM - user manual
-39-
