Chapter 3: Web Interface
User Name
Assign a
User Name
/ Account. The administrator can set up to 32 case
sensitive character names.
Password
Assign a password to the account. The administrator can set up to 32 case
sensitive passwords.
Permission
This sets the access level to individual user accounts.
Administrator
:
An Administrator has full access including write permission
to all menus and sub-sections. Only an Administrator can
see the
User Name
and
IP
a
ddress
fields or set the camera
access
Permit Hours
to Operator or Viewer accounts.
Operator
:
The user can access all menus, but does not have
permission to amend the data fields.
Viewer
:
The user can only view camera within the time specified in
Permit Hours
. The user does not have write permission,
can only view
Camera
A/B
and read the
Information
section.
No Access
:
This disables either of the above two permission levels given
to a user.
Note:
An
Administrator
account must be set before setting up either an
Operator
or
Viewer
account.
IP Filter
Use this feature to ensure that the user only login from the IP address specified
here. Leave it as
*.*.*.*
to allow the user to login from any place.
Example:
Entering
192.168.1.*
will only allow User to access from
192.168.1.xxx
IP
addresses.
Max FPS
This allows the Administrator to limit the bandwidth allocated to each account.
The Administrator can set a figure of
1
to
Unlimited
FPS (“frames per second”).
Viewing Hours
When the Permission level is set to either
Operator
or
Viewer
, the Administrator
can set the time to which the camera can be viewed.
WebCAM - user manual
-24-
