4-14
C
HAPTER
4: L
OADING
N
ETWORK
D
RIVERS
Loading Windows 95 Drivers
If you have Windows 95 running on your computer, you must
load the driver from the
EtherDisk
diskette. Follow these steps:
1
After inserting the 3C592 EISA adapter, connecting it to the
network, and running the configuration utility program,
reboot your computer.
Windows 95 will notify you that new hardware has been
found and is located in slot number “X.”
2
When you are prompted to select the driver you want to
install for your new hardware, select this option:
Driver from disk by hardware manufacturer
3
Click OK.
4
You are prompted to insert the manufacturer’s disk into
the drive selected.
a
Insert the
EtherDisk
diskette and click
OK
.
b
In the panel at the bottom of the dialog box, type the
drive name and the path name from which Windows 95
should copy the manufacturer’s files.
(An information file on the diskette tells Windows 95
where to find the information it needs, for example A:\.)
5
Click OK.
This imports the driver from the
EtherDisk
diskette.
For on-line help information about any of the fields in the
Windows 95 display boxes, click the question mark (?) in the
upper right corner of the box and move the cursor to the field
of interest and click once again.
