3Com III Handbook Download

Page: 58 / 232

Page 50

Using Your Basic Applications

To Do List

To Do List is a convenient place to create reminders and
prioritize the things that you have to do.

In To Do List, you can do the following:

■

Make a quick and convenient list of things to do.

■

Assign a priority level to each task.

■

Assign a due date for any or all of your To Do List items.

■

Assign To Do List items to categories so that you can organize and

view them in logical groups.

■

Sort your To Do List items either by due date, priority level, or

category.

■

Attach notes to individual To Do List items for a description or

clarification of the task.

To open To Do List:

■

Press the To Do List application button on the front panel of your

organizer. To Do List opens to display the category of items you
last viewed.

Note:

Press the To Do List application button repeatedly to cycle

through the categories in which you have items.

To Do List button

Summary of Contents for III









































































































































































































































Search results

Summary of Contents for III

Reviews:

Related manuals for III

Brands by name

Popular brands

3Com III, Handbook

Search results

Summary of Contents for III

Reviews:

Related manuals for III

Brands by name

Popular brands