3Com IntelliJack NJ200, Supplementary Manual

3 C O M

®

N J 2 0 0   N E T W O R K   J A C K — V L A N S   &   T R A F F I C   P R I O R I T I Z AT I O N

11

Setting Up Traffic Priority Schedule Policy

Use this setting to modify how the switch will receive frames from each queue:

1. Open 

3Com Central Configuration Manager

and select 

Devices

from the main menu.

2. From the list of devices, select an NJ200/NJ205 and then select 

Property

. You can

also highlight and right-click on the NJ200/NJ205 and select 

Property

.

3. Click on the 

Hardware Settings

tab to view and configure the 

Priority Schedule

Policy

settings. You should see a window like this:

4. Under 

Priority Schedule Policy

, choose one of the following:

a) 8,4,2,1 weighted fair queuing  (default)

b) Strict Priority Scheme (all queues weighted the same)

5. When all configuration settings are complete, click on the 

Apply

button, which

opens a password-prompt window. After the password is accepted a screen will
appear summarizing the new settings. Click 

OK

to accept and close configuration

window.

Figure 8.

Traffic priority schedules are individually

configured for each PAN port.