70
C
HAPTER
7: G
ETTING
M
ORE
FROM
Y
OUR
T
ELEPHONE
S
YSTEM
Hunt groups can be static or dynamic:
■
If you are in a
static
hunt group, you are always part of that group
along with the other group members.
■
If you are in a
dynamic
hunt group, you must log in to the group to be
part of it.
To log in to a dynamic hunt group using your NBX Telephone:
1
Pick up the handset.
2
Press the
Feature
button followed by the hunt group number that is
assigned by your administrator. The ranges of possible hunt group
numbers are shown in
Table 11
.
3
Dial the hunt group password, which is assigned by your administrator.
4
Press
#
.
To log out of a dynamic hunt group using your NBX Telephone:
1
Pick up the handset.
2
Press the
Feature
button followed by the hunt group number.
3
Hang up the telephone.
Your administrator can configure a hunt group to an Access button on an
NBX Business Telephone. To log in to or to log out of the hunt group,
press the specified Access button. The indicator next to the button lights
to show that you are logged in. On the NBX Basic Telephone, the display
panel shows the message
IN
.
To log in to a dynamic hunt group using the NBX NetSet utility:
1
Log in to
NBX NetSet > User Information > Hunt Groups
and select
the number of the hunt group that you want to log in to.
2
Click
Log In
, and then click
Close
.
If you log in to a dynamic hunt group and do not answer a call when it
rings on your telephone, the system logs you out of the group.
Table 11
Hunt Group Numbers (Assigned by the Administrator)
On an NBX 100 system
On a SuperStack 3 NBX system
850 – 879
850 – 879 and 900 – 969
Summary of Contents for NBX NBX 1102
Page 10: ...10 ABOUT THIS GUIDE...
Page 96: ...96 INDEX...
