Paging
73
b
From an NBX Basic Telephone, press the hook switch. When you hear
the dial tone, dial the user’s extension, or use the paging feature. See
“Paging”
next for details.
To retrieve a parked call:
1
Pick up the handset of any telephone on the system.
2
Dial the Call Park extension that was assigned to the call.
Paging
Depending on your location and equipment, you can broadcast a
message in one of three ways, as described in
Table 13
.
1
Pick up the handset.
2
Dial the paging extension as shown in
Table 13
).
3
Speak into the NBX Telephone handset and then hang up.
Do
not
press the
Feature
button before you dial the Paging extension.
Dialing a Call to a
Remote Office
You can dial calls between sites that are separated geographically but
that are linked by a Wide Area Network (WAN) connection. Typical
configurations are described in the next sections.
Using Unique
Extensions
In the sample network shown in
Figure 6
, each site must have
unique
telephone extensions
. Whenever you make a call to an extension not
located at your own site, your NBX system sets up a connection to the
appropriate site.
Table 13
Paging Extension
Feature
NBX 100
(default extension)
SuperStack 3 NBX
(default extensions)
External Paging
Broadcast an announcement over a public address
system that has a paging amplifier and speaker
system that is connected to your NBX system
620
6200
Internal Paging
Broadcast an announcement through the speakers
on all NBX
®
Telephones on your system
621
6201
Simultaneous Paging
Broadcast an announcement externally and
internally at the same time
622
6202
Summary of Contents for NBX NBX 1102
Page 10: ...10 ABOUT THIS GUIDE...
Page 96: ...96 INDEX...
