8
C
HAPTER
1: I
NSTALLING
AND
C
ONNECTING
THE
C
ARD
Type II PC Card
When using the XJACK connector, the card LED displays the status of your
network link as follows:
■
Green indicates a 10 Mbps link.
■
Yellow indicates a 100 Mbps link.
■
Off indicates that there is no connection between the card and the hub.
You can use the LEDs to verify link integrity when the LAN+Modem card is
connected to the network and the network drivers are installed.
Installing 3Com
Utilities and
Documentation
If you did not install the WorldPort country selection software when you installed
this manual, do so now.
To install the 3Com utilities and online documentation:
1
Insert the
Installation CD
in the CD-ROM drive and wait for the setup program to
start automatically.
2
From the 3Com PC Card Installer menu, select the function you want to perform.
.
Check with your MIS manager about whether to install other utilities included
with the LAN+Modem card.
Opening the
User Guide
After the
User Guide
has been installed, to start it in your browser:
1
Open the
Start
menu and select
Programs
.
2
Select
3Com Mobile
.
3
Select
3Com 3CXSH654B
.
4
Select
User Guide
.
In Windows 2000 use the Microsoft country selection utility instead of the
WorldPort utility.
