System Tools
49
Select the
Configuration
tab to display the
Configuration
screen
(
Figure 35
).
Backup Configuration
Click
BACKUP
to save the current Access Point configuration. You will be
prompted to download and save a file to disk.
Restore Configuration Data
If you want to reinstate the configuration settings previously saved to a
file, press
Browse
to locate the backup file on your computer, and then
click
RESTORE
to copy the data into the Access Point's memory.
The password will remain unchanged.
Reset to Factory Default
If you want to reset the settings on your Access Point to those that were
loaded at the factory, click
RESET
. You will lose all your configuration
changes. The Access Point reverts to a DHCP client and will therefore
restart requiring a new IP address. To communicate with the Access Point
you may need to rerun the DISCOVERY software to find out the IP
address of the Access Point. See
Appendix A
for more information. You
may need to reconfigure and restart your computer to re-establish
communication with the Access Point.
Upgrade
Figure 36
Upgrade Screen
The Upgrade facility allows you to install on the Access Point any new
releases of system software that 3Com may make available. To install new
software, you first need to download the software from the 3Com
Summary of Contents for OfficeConnect 3CRWE41196
