62
C
HAPTER
5: G
ATEWAY
C
ONFIGURATION
6
Enter your PPP over Ethernet service name in the
PPPoE Service Name
text
box. Not all ISPs require a PPPoE service name. Only enter a service name
if your ISP requires this.
7
Select an idle time from the
Maximum Idle Time
drop-down list.
This value will correspond to the amount of idle time (no Internet activity)
that will pass before the Gateway automatically ends your PPP over
Ethernet session.
Since the Gateway contains its own PPPoE client, you no longer need to
run PPPoE client software on your computer to access the Internet.
PPTP
Figure 44
PPTP Setup Screen
To setup the Gateway for use with a PPTP connection, use the following
procedure:
1
Select
PPTP (used by some European providers)
in the
IP Allocation Mode
field. (
Figure 44
)
2
Enter your PPTP server address in the
PPTP Server Address
text box (this is
typically the address of your modem).
3
Enter your PPTP user name in the
PPTP User Name
text box.
4
Enter your password in the
PPTP Password
text box.
Summary of Contents for OfficeConnect 3CRWE53172
