60
C
HAPTER
5: G
ATEWAY
C
ONFIGURATION
Dynamic IP Address
Figure 42
Connection Parameters Screen - Dynamic IP
If this mode is selected, your IP Address, Subnet Mask, and DNS Address
will be obtained automatically from your ISP. They are not displayed on
this screen, but may be viewed on the Status screen (click on
Status and
Logs
on the left hand menu bar).
To setup the Gateway for use with a dynamic IP address connection:
1
Select
Dynamic IP Address (automatically allocated)
in the
IP Allocation
Mode
field. (
Figure 42
)
2
Enter your
Primary DNS Address
and
Secondary DNS address
.
Your ISP may provide you with primary and secondary DNS addresses. If
they have been provided, enter the addresses in the appropriate text
boxes. If not, leave
0.0.0.0
in the boxes.
3
Enter the
Host Name
(optional).
Some ISPs require a host name. If your ISP has this requirement, enter the
host name in the
Host Name
text box.
4
If you use ‘Cable’, your ISP may use your MAC address to authenticate
you. If this is the case, you will need to ‘Clone’ your MAC address. There
are three options:
■
Use the Gateway’s original Internet MAC address
- This field is
selected by default and is automatically filled in with the MAC address
of the Gateway.
Summary of Contents for OfficeConnect 3CRWE554G72
