![background image](http://html1.mh-extra.com/html/3com/officeconnect-wl-537/officeconnect-wl-537_user-manual_3140221045.webp)
LAN Settings
49
The LAN Settings screen is used to specify the LAN IP address of your
Router, and to configure the DHCP server.
1
Select
Unit Configuration
and then specify the Router
IP Address
and
Subnet Mask
in the LAN Settings section. The default IP address of the
Router is 192.168.1.1.
2
If you want to use the Router as a DHCP Server, check the
Enable
check
box.
3
Clicking
Auto Range
will automatically choose the largest available range
of addresses for your network. Alternatively, you can change the address
range by changing the last digit(s) of the
IP Pool Start Address, or
the
IP
Pool End Address,
or both.
4
If you use 3Com NBX telephones, enter the IP address of the NBX call
processor at
3Com NBX Call Processor
.
5
Check all of your settings, and then click
Apply
.
The DHCP server will give out addresses to both wired and wireless
clients.
Static DHCP
Assignment
Figure 33
Static DHCP Assignment Screen
Click on the
DHCP Client Tab
to display a list of all the DHCP clients in
your network.
DHCP Clients List
Summary of Contents for OfficeConnect WL-537
Page 6: ...10 ABOUT THIS GUIDE...
Page 14: ...18 CHAPTER 1 INTRODUCING THE ROUTER...
Page 40: ...44 CHAPTER 4 RUNNING THE SETUP WIZARD...
Page 88: ...92 CHAPTER 5 ROUTER CONFIGURATION...