3Com OfficeConnect WX4400 Reference Manual Download

Page: 416 / 528

416

HAPTER

15: U

SING

THE

VENT

Creating and Saving

Filters

If you have specified additional criteria to filter the events, you can save
the criteria as a stored custom filter.

In the Stored Filters group box, type a new filter name in the Name box.

Type a name for the filter (1 to 80 alphanumeric characters, with no tabs).

Click

Save

The filter is saved and appears in the Stored Filters list.

Deleting Filters

You can delete any filter that you create, but you cannot delete
predefined filters.

To delete a filter:

In the Stored Filters group box, select the filter to be deleted.

Click

Delete

. The filter is deleted.

Exporting Filtered

Data

You can export the filtered data shown in Event Viewer to a
comma-delimited text (.csv) file.

To export filtered data

In the toolbar for the Event log, click

. The Export Data dialog

appears.

To specify a directory and name for the file, click

Choose

To overwrite existing files, select

Overwrite Existing Files

By default, this option is selected.

To copy files before overwriting them, select

Copy Files Before

Overwriting

By default, this option is selected. The existing file is copied to a file with
a .bak extension.

Click

Export

You can see the status of the export process in the Results box.

Click

Close

Summary of Contents for OfficeConnect WX4400

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for OfficeConnect WX4400

Reviews:

Related manuals for OfficeConnect WX4400

Brands by name

Popular brands

3Com OfficeConnect WX4400, Reference Manual

Search results

Summary of Contents for OfficeConnect WX4400

Reviews:

Related manuals for OfficeConnect WX4400

Brands by name

Popular brands