Display Commands of the Routing Table
539
Parameter
■
protocol: Has multiple selectable values:
■
direct: Displays direct connection route information
■
static: Displays static route information.
■
bgp: Displays BGP route information.
■
isis: Displays IS-IS route information.
■
ospf: Displays OSPF route information.
■
ospf-ase: Displays OSPF ASE route information.
■
ospf-nssa: Displays OSPF NSSA route information.
■
rip: Displays RIP route information.
■
inactive
: With the parameter, this command displays the inactive route
information. Without the parameter, this command displays the active and
inactive route information.
■
verbose
: With the
verbose
parameter, this command displays the verbose
routing information. Without the parameter, this command displays the route
summary.
Description
Using the display ip routing-table protocol command, you can view the routing
information of specified protocol.
Example
Display all direct connection routes summary.
<3Com> display ip routing-table protocol direct
DIRECT Routing tables:
Summary count: 4
DIRECT Routing tables status:<active>:
Summary count: 3
Destination/MaskProto Pre Cost NexthopInterface:
20.1.1.1/32DIRECT 00127.0.0.1InLoopBack0
127.0.0.0/8DIRECT 00127.0.0.1InLoopBack0
127.0.0.1/32DIRECT 00127.0.0.1InLoopBack0
DIRECT Routing tables status:<inactive>:
Summary count: 1
Destination/MaskProto PreCostNexthopInterface
210.0.0.1/32DIRECT 0 0127.0.0.1InLoopBack0
Display the static routing table.
<3Com> display ip routing-table protocol static
STATIC Routing tables:
Summary count: 1
STATIC Routing tables status:<active>:
Summary count: 0
STATIC Routing tables status:<inactive>:
Summary count: 1
Destination/Mask Proto Pre Cost Nexthop Interface
1.2.3.0/24 STATIC 60 0 1.2.4.5 Ethernet
2/0/0
Summary of Contents for Router 3000 DSL Series
Page 6: ......
Page 686: ...686 CHAPTER 6 ROUTING PROTOCOL ...
Page 758: ...758 CHAPTER 7 MULTICAST COMMON CONFIGURATION COMMANDS ...