684
C
HAPTER
6: R
OUTING
P
ROTOCOL
Parameter
■
limit-value: Lower limit of the router idle memory, in the unit of Mbytes. Its
value range depends on the idle memory of the current router. The default
value is 20Mbytes.
Description
Using the memory limit command, you can configure the lower limit of the router
idle memory. When the idle memory of the router is less than this limit, all the
routing protocol connections will be disconnected forcibly. Using the undo
memory limit command, you can configure the safety value and the lower limit of
the router idle memory to the default configuration.
The
limit-value
in the command must be less than the current idle memory safety
value, and otherwise the configuration will fail.
This command can be used with memory safety command to change the safety
value and lower limit of the router idle memory. The
safety-value
must be more
than the
limit-value
in the command, and otherwise the configuration will fail.
For the related commands, see memory auto-establish disable, memory
auto-establish enable, memory safety, and display memory limit.
Example
Set the lower limit of the router idle memory to 25Mbytes.
[3Com] memory limit 25
[3Com]
%8/19/2002 16:35:41-RM-5-RTLOG:You have changed the memory
limit/safety value
Set the lower limit of the router idle memory to 25Mbytes and the
safety value to 30Mbytes.
[3Com] memory safety 35 limit 25
[3Com]
%8/19/1995 15:45:58-RM-5-RTLOG:Changed the system memory
limit(20->25)/ safety(30->35) successfully
memory safety
Syntax
memory safety
safety-value
undo memory safety
View
System view
Parameter
■
safety-value: Safety value of the router idle memory, in the unit of Mbytes. Its
value range depends on the idle memory of the active router. The default value
is 30Mbytes.
Description
Using the memory safety command, you can configure the safety value of the
router idle memory. Using the undo memory safety command, you can configure
the safety value and the lower limit of the router idle memory to the default
configuration.
Summary of Contents for Router 3000 DSL Series
Page 6: ......
Page 686: ...686 CHAPTER 6 ROUTING PROTOCOL ...
Page 758: ...758 CHAPTER 7 MULTICAST COMMON CONFIGURATION COMMANDS ...
