5-5
Table 5-2
Normal LED states upon device power-on
LED
State
Meaning
PWR (green)
On
The power module is supplying power
normally.
SLOT1/SLOT2/SLOT (green)
On
A module is installed in the slot and
operating normally.
SYS (green)
Slow blinking (1 Hz)
The mainboard is operating normally as
configured.
CF (green)
On
The host detects that the external CF card
works normally. In this state, you can
remove the CF card.
2) The fans work normally.
3) The buzzer beeps at power-on.
4) The configuration terminal displays information normally. You can see the startup window on the
local configuration terminal. For more information, see “Startup Process” on page 5-5.
5) After the power-on self-test (POST), the system prompts you to press
Enter
. When the command
line prompt appears, the UTM device is ready to configure.
Startup Process
After power-on, the UTM device initializes its memory, and then runs the extended BootWare. The
following information appears on the terminal screen, taking the U200-A for example:
The information displayed on the terminal may vary with different BootWare versions.
System is starting...
Booting Normal Extend BootWare....
**************************************************************************
* *
* H3C SecPath UTM200-A BootWare, Version 1.10 *
* *
**************************************************************************
Copyright (c) 2004-2008 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : May 7 2008
CPU Type : XLS208
CPU L1 Cache : 32KB
CPU Clock Speed : 750MHz
Memory Type : DDR2 SDRAM
Memory Size : 1024MB
Memory Speed : 533MHz
