6-17
Gateway IP Address :
FTP User Name :
FTP User Password :
Table 6-7
Description on the display information of setting Ethernet interface parameters
Display information
Description
'.' = Clear field
Shortcut key
.
is used to clear the current input.
'-' = Go to previous field
Shortcut key
-
is used to return to the previous field.
Ctrl+D = Quit
Shortcut key
Ctrl+D
is used to quit the parameter setting page.
Protocol (FTP or TFTP)
Choose to upgrade application programs using TFTP/FTP
Load File Name
Name of the download file, which needs to be the same with that of
the actual file to be downloaded.
At the same time, you need to set the download path in TFTP/FTP.
Note that:
z
The first “main.bin” is the file name automatically remembered by
the system at the last update; the second “main.bin” is the source
file name set by the user.
z
An application file name including the extension such as .bin,
cannot exceed 50 characters.
Target File Name
Name of the target file after the file is downloaded to the device. The
extension of the target file needs to be the same with that of the
downloaded file.
Note that the first “main.bin” is the file name automatically
remembered by the system at the last update; the second “main.bin”
is the source file name set by the user.
Server IP Address
IP address of the FTP/TFTP server.
Local IP Address
IP address of the interface connected with the FTP/TFTP server.
Gateway IP Address
IP address of the gateway. You need not configure this IP address.
FTP User Name
FTP username, which will be used in FTP download. TFTP
download needs no username.
FTP User Password
FTP password, which will be used in FTP download. TFTP needs no
password.
To use the default parameter after the colon, press
Enter
directly.
Step3
After the above configuration, the system will automatically return to the Ethernet submenu, where you
can select
2
to upgrade the main application file.
Loading................................... done
11611272 bytes downloaded!
Updating File flash:/utm.bin
.........
.........done
