6-27
|3 2294 May/11/2008 14:47:32 N/A flash:/~/startup.cfg |
|4 2094 May/11/2008 13:47:34 N/A flash:/~/startup_bac.cfg |
=========================================================================
Displaying all files through command lines
Directory of flash:/
0 drw- - Jun 11 2008 19:09:42 logfile
1 -rw- 11611272 Jun 13 2008 13:21:20 main.bin
2 -rw- 1128 Jun 27 2008 11:07:24 startup.cfg
3 -rw- 558 Jun 11 2008 20:20:38 config.cfg
4 -rw- 558 Jun 11 2008 20:23:10 config_bac.cfg
506336 KB total (506272 KB free)
Table 6-14
Description on the display information of the dir command
Display information
Description
Directory of flash:/
Name of the current directory.
506336 KB total (506272 KB free)
Used space of the storage medium (available space)
For details about the
dir
command, refer to the accompanying documentation.
Setting the Application File Type
Setting application file type on the BootWare menu
You can modify the type of application files on the BootWare menu or using commands after the
application files boot; you cannot modify the type of an application file of type S. For more information
about the attributes of each type of application file, refer to the “Application File” section on page 6-1.
Select
2
on the file control submenu, and the system displays:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
======================================================================
1NO. Size(B) Time Type Name 1
11 10129712 Jun/11/2008 05:39:50 B flash:/main.bin 1
12 10129712 Jun/11/2008 05:39:50 M flash:/main_bak.bin 1
10 Exit 1
======================================================================
Enter file no:
Enter the file number, select
1
, and the system displays:
Modify the file attribute:
| <1> +Main |
| <2> -Main |
