manualshive.com logo in svg

3Com SUPERSTACK 2200, User Manual

The 3Com SUPERSTACK 2200 offers exceptional networking capabilities for businesses. To get the most out of this versatile product, users need a comprehensive User Manual. Download the manual for free from our website, enabling you to maximize the potential of the SUPERSTACK 2200 without any additional costs.

Share
Download
background image

 

3Com Corporation  

 

■

 

  5400 Bayfront Plaza  

 

■

 

  Santa Clara, California  

 

■

 

  95052-8145

 

© 3Com Corporation, 1996. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make
any derivative work (such as translation, transformation, or adaptation) without permission from 3Com Corporation.

3Com Corporation reserves the right to revise this documentation and to make changes in content from time to time without obligation on the
part of 3Com Corporation to provide notification of such revision or change.

3Com Corporation provides this documentation without warranty of any kind, either implied or expressed, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose. 3Com may make improvements or changes in the product(s) and/or
the program(s) described in this documentation at any time.

 

UNITED STATES GOVERNMENT LEGENDS:

 

If you are a United States government agency, then this documentation and the software described herein are provided to you subject to the
following restricted rights:

 

For units of the Department of Defense:

 

Restricted Rights Legend: 

 

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) (1) (ii) for

restricted Rights in Technical Data and Computer Software clause at 48 C.F.R. 52.227-7013. 3Com Corporation, 5400 Bayfront Plaza, Santa Clara,
California 95052-8145.

 

For civilian agencies:

 

Restricted Rights Legend:

 

 

 

Use, reproduction, or disclosure is subject to restrictions set forth in subparagraph (a) through (d) of the Commercial

Computer Software - Restricted Rights Clause at 48 C.F.R. 52.227-19 and the limitations set forth in 3Com Corporation’s standard commercial
agreement for the software. Unpublished rights reserved under the copyright laws of the United States.

If there is any software on removable media described in this documentation, it is furnished under a license agreement included with the
product as a separate document, in the hardcopy documentation, or on the removable media in a directory file named LICENSE.TXT. If you are
unable to locate a copy, please contact 3Com and a copy will be provided to you.

Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in other countries.

3Com, LANplex, LinkBuilder, NETBuilder, NETBuilder II, ViewBuilder, EtherDisk, EtherLink, EtherLink II, and Transcend are registered trademarks of
3Com Corporation. 3TECH, FDDILink, SmartAgent, and Star-Tek are trademarks of 3Com Corporation. 3ComFacts is a service mark of 3Com
Corporation.

IBM and Netview AIX are registered trademarks of International Business Machines Corporation. Apple, AppleTalk, and Macintosh are trademarks
of Apple Computer, Inc. CompuServe is a registered trademark of CompuServe, Inc. MS-DOS and Windows are registered trademarks of
Microsoft Corporation. OpenView is a registered trademark of Hewlett-Packard Co. Sniffer is a registered trademark of Network General Corp.
SunNet Manager, SunOS, and OpenWindows are trademarks of Sun Microsystems, Inc. UNIX is a registered trademark of Novell Inc.

Other brand and product names may be registered trademarks or trademarks of their respective holders.

Guide written, edited, and illustrated by Beth Britt, Patricia Crawford, Lynne Gelfand, Michael Jenness, Patricia L. Johnson, Michael Taillon, and
Iain Young. Edited by Bonnie Jo Collins. 

Summary of Contents for SUPERSTACK 2200









































































































































































































Reviews:

No comments

Related manuals for SUPERSTACK 2200

CALIENT S320 Repair And Diagnostics Field Manual preview
S320
Brand: CALIENT Pages: 22
OFFICINE OROBICHE PL Series Instruction Manual preview
PL Series
Brand: OFFICINE OROBICHE Pages: 7
3One data IPS7110-2GC-8POE Quick Installation Manual preview
IPS7110-2GC-8POE
Brand: 3One data Pages: 3
Accedian Skylight LX Installation Manual preview
Skylight LX
Brand: Accedian Pages: 2
IBM 8275-416 User Manual preview
8275-416
Brand: IBM Pages: 156
Cooper Crouse-Hinds CEAG KO Operating Instructions Manual preview
Crouse-Hinds CEAG KO
Brand: Cooper Pages: 12
Linksys SRW208L Product Data preview
SRW208L
Brand: Linksys Pages: 3
FS IES3110-8TF Quick Start Manual preview
IES3110-8TF
Brand: FS Pages: 33
Comprehensive CDA-CV20 User Manual preview
CDA-CV20
Brand: Comprehensive Pages: 6
Sarowin HDSW0016M1 User Manual preview
HDSW0016M1
Brand: Sarowin Pages: 9
ADC ICX-250 User Manual preview
ICX-250
Brand: ADC Pages: 75
Cabletron Systems SmartSTACK 100 User Manual preview
SmartSTACK 100
Brand: Cabletron Systems Pages: 110
TP-Link LiteWave LS105G Installation Manual preview
LiteWave LS105G
Brand: TP-Link Pages: 3
AMAV VS81 Installation And Operation Manual preview
VS81
Brand: AMAV Pages: 8
H3C S9820-64H Manual preview
S9820-64H
Brand: H3C Pages: 39
Witura WT-1673 User Manual preview
WT-1673
Brand: Witura Pages: 12
BJ Live BJ-277 User Manual preview
BJ-277
Brand: BJ Live Pages: 2
GarrettCom DS8016 Installation And User Manual preview
DS8016
Brand: GarrettCom Pages: 42

Brands by name

Popular brands

Load more brands