Manually Configuring IP Information
37
2
At the login and password prompts, enter
admin
as your user name and
press Return at the password prompt. If you have logged on correctly, the
top-level menu of the command line interface is displayed as shown in
the example in
Figure 8
.
Figure 8
Example top-level command line interface menu
3
At the Select menu option prompt you can either:
■
enter the
protocol ip basicConfig
command. At the
Enter
configuration method
prompt enter
manual
. The screen
prompts you to enter IP information.
or
■
enter the
gettingStarted
command. At the
Enter
configuration method
prompt enter
manual
. The screen
prompts you to enter IP information.
4
Enter the IP address, subnet mask, and gateway IP address for the Switch.
The screen displays a summary of the information entered.
If using the
gettingStarted
command you will then be prompted to
enter system information, change passwords, and then given the option
to carry out advanced configuration.
The initial set up of your Switch is now complete and the Switch is ready
for you to set up your chosen management method. See
“Methods of
Managing a Switch”
on
page 41
.
If you do not intend to use the command line interface via the console
port to manage the Switch, you can logout, disconnect the serial cable
and close the terminal emulator software.
DUA1745-0AAA02.book Page 37 Monday, August 9, 2004 11:51 AM
Summary of Contents for SUPERSTACK 3 3870 Series
