214
C
HAPTER
3: D
EVICE
C
ONFIGURATION
5
Click
OK
.
6
Connect your CO line to the configured port.
Modifying a
Line Card Port
You can modify a line card port that is already configured.
To modify a line card port:
1
In the
NBX NetSet - Main Menu
window, click
Device Configuration
. The
Device Configuration dialog box appears (Figure 49).
2
Click the
Line Card Ports
tab. Line Card Ports dialog box appears
(Figure 72).
3
Select the port you want to modify from the list.
4
Click
Modify
. The Modify Line Card Port dialog box appears (Figure 74).
Mapped to a button on the
Receptionist’s Telephone (or
to a button on an Attendant
Console associated with the
Receptionist’s telephone)
500
Receptionist’s telephone rings. If no one answers, the call
transfers to the Automated Attendant.
NOTE:
The call coverage point defined for the receptionist’s
telephone has no affect.
The transfer occurs after the number of seconds specified on
the
Time Out
line in the Modify Line Card Port dialog box for
the appropriate time of day (Open, Closed, Lunch, Other).
Device Configuration > Line Card Ports > Modify
Mapped to a button on a user
telephone (or to a button on
an Attendant Console
associated with the user’s
telephone)
Extension of the
Receptionist
User telephone rings. If no one answers, the call transfers to
the Receptionist’s telephone.
The transfer occurs after the number of seconds specified on
the
Time Out
line in the Modify Line Card Port dialog box for
the appropriate time of day (Open, Closed, Lunch, Other).
Device Configuration > Line Card Ports > Modify
If the receptionist’s telephone is not answered, the call
transfers to the call coverage point defined for the
receptionist’s telephone.
User Configuration > Users > User Settings > Call Forward
Mapped to a button on a user
telephone (or to a button on
an Attendant Console
associated with the user’s
telephone)
500
User telephone rings. If no one answers, the call transfers to
the Automated Attendant.
The transfer occurs after the number of seconds specified on
the
Time Out
line in the Modify Line Card Port dialog box for
the appropriate time of day (Open, Closed, Lunch, Other).
Device Configuration > Line Card Ports > Modify
Table 33
Auto Extension Configuration (continued)
Button Mapping Setting
for This Line
Auto Extension
Setting
Incoming Call Behavior
Summary of Contents for SuperStack 3 NBX
