Configuring and Managing E1 Digital Line Cards
279
Viewing DSP (Digital Signal Processor) Details
To view DSP (Digital Signal Processor) details:
1
Return to the
Digital Line Cards
tab.
2
From the
Select Device Type
list, select
T1/ISDN Board List
and click
Apply.
3
Select the board you want and click
Status
.
4
In the Board Status dialog box, select a DSP from the
DSP List
and click
Details (
Figure 107).
Figure 107
DSP Status Window
5
Click
Close
to close the
DSP Status
window.
Modifying IP Settings
for an E1 Card
You can modify the IP settings for an E1 card to meet changing
requirements.
The board must be on the same subnetwork as the Call Processor to
modify IP settings.
To modify the IP settings of a Digital Line Card:
1
In the
NBX NetSet - Main Menu
window (Figure 97), click
Device Configuration
and then the
Digital Line Cards
tab (Figure 98).
2
From the
Select Device Type
pull-down list, select
T1/ISDN Board List
.
Summary of Contents for SuperStack 3 NBX
