Dial Plan Tables
35
Figure 2
Dial Plan Command Format
Table 6 describes each field of a dial plan command.
Table Create 1 Internal
/ Id Entry Digits Min Max Class Prio Route
/
TableEntry Create 1 1 0 1 1 Internal 0 4
TableEntry Create 1 2 1 3 3 Internal 0 0
TableEntry Create 1 3 2 3 3 Internal 0 0
Table Create 2 Incoming
/ Id Entry Digits Min Max Class Prio Route
/
TableEntry Create 2 1 0 1 1 Internal 0 4
TableEntry Create 2 2 1 3 3 Internal 0 0
Table Create 3 Least Cost Routing
/ Id Entry Digits Min Max Class Prio Route
TableEntry Create 3 1 91607387 12 12 LongDistance 0 10
Command
Table ID Number
Leading Digits to Collect
Table Entry ID Number
Call Classification
—
Used
with Class of Service
Priority
(Not Used)
Table Name
Number of the
route (dial tone
facility) from
Routing Tables
Maximum and Minimum
Characters to Collect
Table 6
Dial Plan Command Fields
Field
Description
Command
Command name. For example, TableEntry Create is the command that make Class of Service
and call routing decisions based on the correspondence of dialed digits and table entry digits.
See “Dial Plan Configuration File Commands” later in this chapter for a description of each
command.
Table ID Number
Table ID number. This is always 1 for the Internal dial plan table, 2 for the Incoming dial plan
table, and 3 for the Least Cost Routing Table.
Summary of Contents for SuperStack 3 NBX
