1-8
To do…
Use the command…
Remarks
Download a remote file from
the FTP server
get
remotefile
[
localfile
]
Upload a local file to the remote
FTP server
put
localfile
[
remotefile
]
Rename a file on the remote
server
rename
remote
-
source
remote-dest
Log in with the specified user
name and password
user
username
[
password
]
Connect to a remote FTP
server
open
{
ip-address
|
server-name
} [
port
]
disconnect
Terminate the current FTP
connection without exiting FTP
client view
close
quit
Terminate the current FTP
connection and return to user
view
bye
Display the online help about a
specified command concerning
FTP
remotehelp
[
protocol
-
command
]
Optional
Enable the verbose function
verbose
Optional
Enabled by default.
Specifying the source interface and source IP address for an FTP client
You can specify the source interface and source IP address for a switch acting as an FTP client, so that
it can connect to a remote FTP server.
Follow these steps to specify the source interface and source IP address for an FTP client:
To do…
Use the command…
Remarks
Specify the source interface
used for the current connection
ftp
{
cluster
|
remote-server
}
source-interface
interface-type interface-number
Optional
Specify the source IP address
used for the current connection
ftp
{
cluster
|
remote-server
}
source-ip ip-address
Optional
Enter system view
system-view
—
Specify an interface as the
source interface the FTP client
uses every time it connects to
an FTP server
ftp source-interface
interface-type interface-number
Specify an IP address as the
source IP address the FTP
client uses every time it
connects to an FTP server
ftp source-ip ip-address
Use either command
Not specified by default
Display the source IP address
used by an FTP client every
time it connects to an FTP
server
display ftp source-ip
Available in any view
