To do…
Use the command…
Remarks
Optional
parity
{
even
|
none
|
odd
}
Set the check
mode
By default, the check mode of a
console port is
none
, that is, no
check is performed.
Optional
stopbits
{
1
|
1.5
|
2
}
Set the stop bits
The stop bits of a console port is 1.
Optional
databits
{
7
|
8
}
Set the data bits
The default data bits of a console
port is 8.
Optional
By default, commands of level 3 are
available to users logging in to the
AUX user interface, and commands
of level 0 are available to users
logging in to the VTY user interface.
Configure the command level
available to users logging in to
the user interface
user privilege level
level
Optional
Enable terminal services
shell
By default, terminal services are
available in all user interfaces.
Optional
By default, the screen can contain up
to 24 lines.
Set the maximum number of
lines the screen can contain
screen-length
screen-length
You can use the
screen-length
0
command to disable the function to
display information in pages.
Optional
The default history command buffer
size is 10. That is, a history
command buffer can store up to 10
commands by default.
Set the history command
buffer size
history-command
max-size
value
Optional
The default timeout time of a user
interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a user
interface is terminated if no operation
is performed in the user interface
within 10 minutes.
Set the timeout time for the
user interface
idle-timeout
minutes
[
seconds
]
You can use the
idle-timeout
0
command to disable the timeout
function.
Configuration Example
1) Network
requirements
Assume that the switch is configured to allow users to log in through Telnet, and the current user level is
set to the administrator level (level 3). Perform the following configurations for users logging in through
the console port (AUX user interface).
z
Do not authenticate the users.
z
Commands of level 2 are available to the users logging in to the AUX user interface.
2-8
