snmp-agent community read read_a@cm0
snmp-agent community write write_a@cm0
snmp-agent sys-info version all
snmp-agent group v3 group_a
snmp-agent mib-view included mib_a org
snmp-agent usm-user v3 user_a group_a
undo snmp-agent trap enable standard
z
Configuration file content on a member device (only the SNMP-related information is displayed)
<test_2.Sysname> display current-configuration
#
snmp-agent
snmp-agent local-engineid 800007DB000FE224055F6877
snmp-agent community read read_a@cm2
snmp-agent community write write_a@cm2
snmp-agent sys-info version all
snmp-agent group v3 group_a
snmp-agent mib-view included mib_a org
snmp-agent usm-user v3 user_a group_a
Local user configuration synchronization
With this function, you can create a public local user for the cluster on the management device, and the
username and password will be synchronized to the member devices of the cluster, which is equal to
creating this local user on all member devices.
The configured local user is a Telnet user, and you can use the public username and password to
manage all member devices through Web.
1) Configuration
prerequisites
z
NDP and NTDP have been enabled on the management device and member devices, and NDP-
and NTDP-related parameters have been configured.
z
A cluster is established, and you can manage the member devices through the management
device.
2) Configuration
procedure
Perform the following operations on the management device to synchronize local user configurations:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter cluster view
cluster
—
Create a public local user
cluster-local-user username
passward { cipher | simple }
passwardstring
Required
Not configured by default.
48-22
