To do…
Use the command…
Remarks
service-type terminal
[
level
level
]
Specify the service type for
AUX users
Required
Quit to system view
—
quit
user-interface aux
0
Enter AUX user interface view
—
Required
The specified AAA scheme
determines whether to
authenticate users locally or
remotely.
authentication-mode
scheme
[
command-
authorization
]
Configure to authenticate
users locally or remotely
By default, users logging in
through the console port (AUX
user interface) are not
authenticated.
Optional
Set the baud
rate
The default baud rate of the AUX
port (also the console port) is
19,200 bps.
speed
speed-value
Optional
Set the check
mode
By default, the check mode of a
console port is set to
none
, that
is, no check bit.
parity
{
even
|
none
|
odd
}
Configure
the console
port
Optional
Set the stop
bits
stopbits
{
1
|
1.5
|
2
}
The default stop bits of a console
port is 1.
Optional
Set the data
bits
databits
{
7
|
8
}
The default data bits of a console
port is 8.
Optional
Configure the command level
available to users logging in to
the user interface
By default, commands of level 3
are available to users logging in to
the AUX user interface.
user privilege level
level
Optional
Make terminal services
available to the user interface
shell
By default, terminal services are
available in all user interfaces.
Optional
By default, the screen can contain
up to 24 lines.
Set the maximum number of
lines the screen can contain
screen-length
screen-length
You can use the
screen-length
0
command to disable the function
to display information in pages.
Optional
The default history command
buffer size is 10. That is, a history
command buffer can store up to
10 commands by default.
Set history command buffer
size
history-command max-size
value
2-13
