Network diagram
Figure 55-14
Switch acts as server for password and RADIUS authentication
Configuration procedure
1) Configure the RADIUS server
This document takes CAMS Version 2.10 as an example to show the basic RADIUS server
configurations required.
# Add an access device.
Log in to the CAMS management platform and select
System Management
>
System Configuration
from the navigation tree. In the
System Configuration
page, click
Modify
of the
Access Device
item,
and then click
Add
to enter the
Add Access Device
page and perform the following configurations:
z
Specify the IP address of the switch as 192.168.1.70.
z
Set both the shared keys for authentication and accounting packets to
expert
.
z
Select
LAN Access Service
as the service type.
z
Specify the ports for authentication and accounting as 1812 and 1813 respectively.
z
Select
Extensible Protocol
as the protocol type.
z
Select
Standard
as the RADIUS packet type.
