Con
Introd
ackup and restoration feature, you can easily back up and restore the
configuration files in the whole fabric as well as in a specific unit.
ystem first saves the current configuration of a unit to the startup
e restore process, the system
the TFTP server to the local unit.
its in the fabric system can be saved in different .cfg configuration files
onfiguration of the whole fabric.
File Backup and Restoration
C
Before performing the following operatio
re that:
z
support TFT
z
z
A route exists between the TF
TFTP client.
Configuration procedure
F
ps to back up and
figuration File Backup and Restoration
uction to Configuration File Backup and Restoration
Formerly, you can only back up and restore the configuration file of the units one by one in a fabric
system.
By using the configuration file b
In the backup process, the s
configuration file, and then uploads the file to the TFTP server. In th
downloads the startup configuration file from
The configurations of different un
on the TFTP server. These configuration files form the startup c
onfiguration prerequisites
ns, you must first ensu
The relevant units
The TFTP server is started
P client.
TP server and
ollow these ste
restore configuration file:
To do…
Use the command…
Remarks
Back up the current
configuration of a specified unit
on to
stname
}
Available in user view
backup
unit
unit-id
current-configurati
{
dest-addr
|
dest-ho
filename.cfg
Optional
Back up the current
configuration of the whole
fabric system
backup
fabric
current-configuration to
{
dest-addr
|
dest-ho
filename.cfg
stname
}
Optional
Available in user view
Restore the startup
configuration of a specified unit
restore
unit unit-id
startup-configuration from
{
source-addr
|
source-hostname
}
filename.cfg
Optional
Available in user view
Restore the startup
configuration of the whole
fabric system
restore
fabric
startup-configuration from
{
source-addr
|
source-hostname
}
filename.cfg
Optional
Available in user view
56-8
