3-5
To do…
Use the command…
Remarks
As for the
acl number
command, the
config
keyword is specified by
default.
acl number
acl-number
[
match-order
{
auto
|
config
} ]
Create a basic ACL or
enter basic ACL view
rule
[
rule-id
] {
deny |
permit
} [
rule-string
]
Define rules for the ACL
Required
Quit to system view
—
quit
snmp-agent community
{
read
|
write
}
community-name
[
acl
acl-number
|
mib-view
view-name
]*
Apply the ACL while
configuring the SNMP
community name
snmp-agent group
{
v1
|
v2c
}
group-name
[
read-view
read-view
]
[
write-view
write-view
] [
notify-view
notify-view
] [
acl
acl-number
]
Apply the ACL while
configuring the SNMP
group name
snmp-agent group
v3
group-name
[
authentication
|
privacy
] [
read-view
read-view
] [
write-view
write-view
]
[
notify-view
notify-view
] [
acl
acl-number
]
Required
According to the SNMP
version and configuration
customs of NMS users,
you can reference an ACL
when configuring
community name, group
name or username. For
the detailed configuration,
refer to
SNMP-RMON
for
more.
snmp-agent usm-user
{
v1
|
v2c
}
user-name
group-name
[
acl
acl-number
]
snmp
-
agent usm
-
user
v3
user-name
group-name
[ [
cipher
]
authentication
-
mode
{
md5
|
sha
}
auth-password
[
privacy
-
mode
{
des56
|
aes128
}
priv-password
] ] [
acl
acl-number
]
Apply the ACL while
configuring the SNMP
user name
Configuration Example
Network requirements
Only SNMP users sourced from the IP addresses of 10.110.100.52 are permitted to log in to the switch.
Network diagram
Figure 3-2
Network diagram for controlling SNMP users using ACLs
Configuration procedure
# Define a basic ACL.
<Sysname> system-view
